A 330 gallon reconditioned IBC tote is the full-size caged container after rinsing and inspection. It pairs the most common tote capacity with a cleaner starting condition, which is why operations that put totes straight into service, without an in-house wash step, often specify it.
2 Tote Options · Availability Confirmed With Your Quote
Out of Stock — Request Sourcing
Product MOQ: 1 Tote
Out of Stock — Request Sourcing
Product MOQ: 1 Tote
Photos are representative. Request current lot photos with your quote.
Rotationally molded models. Choose an option to check availability.
330 Gallons · Reconditioned
Select size and condition on the product page.
View Model DetailsAvailability Check Required
Product MOQ: 1 Tote
330 Gallons · Reconditioned
Select size and condition on the product page.
View Model DetailsAvailability Check Required
Product MOQ: 1 Tote
Reconditioned and rinsed describe the same range on this site: the tote has been cleaned or rinsed and inspected before sale. Not every lot gets identical treatment, so treat "reconditioned" as the start of a conversation. When you request pricing, ask how the lot was rinsed, what was inspected, and whether any valves, caps or gaskets were replaced.
A rinse matters more at this size than many buyers expect. The taller bottle, about 53 inches on a roughly 48 × 40 inch base, is harder to reach into and harder to inspect by hand through a top opening that is commonly 6 inches. Having that work done before delivery saves real time when you are receiving totes by the truckload.
It also changes what you need on site. An as-returned full-size tote may need a pressure washer, a drain area and a plan for the rinse water before it is useful. A reconditioned 330 usually needs only your own final check and any product-specific cleaning, which is why buyers without dedicated wash space lean this way even when the per-unit price is higher.
| Option | Capacity and size (approx.) | Arrives | Pick it when |
|---|---|---|---|
| 330 reconditioned | 330 gal, 48 × 40 × 53 in, 150 lb | Rinsed and inspected | You want full size with less cleanup |
| 330 used | 330 gal, 48 × 40 × 53 in, 150 lb | As returned from service | You clean in-house and want a lower unit price |
| 275 reconditioned | 275 gal, 40 × 48 × 46 in, 135 lb | Rinsed and inspected | Clearance or handling limits rule out the taller tote |
Every condition and grade offered at this capacity is gathered on the 330 gallon IBC totes page. For the general condition question, the reconditioned IBC totes hub and shop by condition page explain the difference between condition levels across all sizes.
Reconditioning does not change a tote's history. A rinsed tote that once carried an industrial chemical is still a non-food-grade tote. So the grade choice comes before the condition choice:
Process and production lines that rotate totes between filling, holding and dispensing appreciate the cleaner start, especially when a compatible product follows. Agricultural operations use reconditioned 330s for fertilizer-water mixing and irrigation reserves where rinse residue would be a nuisance. Rainwater systems on commercial buildings often line up several 330s; see rainwater and non-potable storage. Hose-fed setups usually add a garden hose adapter to the bottom valve.
A rinse is not a sanitation step for your product, and it does not establish hazmat transport status. If you will ship regulated materials, a reused IBC needs a current periodic test and inspection under 49 CFR; we do not claim retest status unless confirmed in your quote.
Reconditioned lots are meant to cut your workload, but a short receiving routine still pays off, because transit can loosen caps or knock a cage.
When totes arrive, spot-check a sample before signing: look inside a few bottles, operate several valves, check cage welds near the top corners where the taller frame takes knocks, and confirm pallets are intact. Empties stack; filled totes often can within the rating on each unit's label. If you would rather inspect at the source, pickup by arrangement is available at our Pennsville, NJ and Tampa, FL yards. Delivered orders ship LTL quoted to your ZIP, or by full truckload of about 60 totes quoted individually, with quantity pricing at higher volumes.
List the size, condition, grade and quantity you need, plus what the totes will hold and your delivery ZIP, on the request a quote page, or call 484-787-7479. We confirm availability, price and the lot's preparation details with your quote, and can send current photos first.
No. Reconditioned on this site means the tote was cleaned or rinsed and inspected before sale. It is still a second-use container with a service history. Ask what preparation and component work was done on the specific lot, and request current photos to judge cosmetic and functional condition.
It depends on the lot. Some lots have component work such as valve, cap or gasket replacement and others do not. Ask when requesting your quote. Replacement valves, caps and gaskets are also available as accessories if you want to standardize fittings across your totes.
It is better if you lack wash capacity or need totes ready for use on arrival. A used 330 is the same container sold as returned from service, usually at a lower unit price, and suits buyers who clean in-house or use totes for rough service where residue matters less.
Roughly 60 fit on one full truck, and each load is priced on its own based on where it is going. If you need fewer, LTL freight is priced to your ZIP, or you can collect from Pennsville, NJ or Tampa, FL by arrangement. The per-tote price steps down as quantity rises.
